Steadyrack Bike Storage Fender Rack – Wall Mount

Space-saving storage rack holds 1 bike with fenders or mudguards vertically on your wall with no lifting required. Hinged brackets let you swing bike against the wall for compact storage. Fits tires up to 2-1/4″ wide. Mounting hardware included.

 

Features:

• Storage rack holds 1 bike with fenders vertically on the wall of your garage, home, or office
• Space-saving design – rack swings to the side with bike loaded
  • Perfect for areas with limited storage space – allows you to use multiple racks close together
  • Tensioned hinge only moves when you apply pressure so bike won’t swing on its own
• Easy-to-load bracket holds your cruiser securely by the front wheel
  • Thin, U-shaped brim is designed to fit easily between tire and fender
• Rear-wheel bracket helps to keep your bike straight on the rack
  • Can be positioned to accommodate any wheelbase

• Brackets fold flat for compact storage
• Easy installation with included hardware
• Black color
• Constructed of durable, ABS plastic and zinc-coated steel

Specs:

• Maximum tire width: 2-1/4″ (57.15 mm)
• Wheel diameter: 20″ – 29″
• Weight capacity: 77 lbs
• Dimensions: 26″ tall x 22″ deep x 4″ wide
• Distance from wall when folded up: 4-1/2″
• Weight: 5 lbs
• 1-Year limited warranty

Note: Rack must be fixed to stud framing or masonry. Fixing to drywall only is not recommended.

 

 

The Steadyrack allows you to store 1 bike with fenders or mudguards vertically on the wall of your garage, home, or office. A folding bracket with a thin, U-shaped brim holds your bike securely by the front wheel, and it requires no lifting to load. A secondary bracket holds your bike’s rear wheel in place. And the rack swings to the side with your bike loaded for compact storage.

 

Space-Saving, Swiveling Design

The front-wheel bracket is hinged so it can swing nearly 180 degrees from side to side. This lets you reposition your bike for compact storage, and it allows you to store multiple bikes close together against the wall. And the tensioned hinge requires pressure to move so your bike won’t swing freely on the rack.

The Steadyrack’s space-saving design allows it to fold flat and out of the way when you aren’t using it. Simply push the brackets toward the wall until the upper bracket snaps into the retaining clips on the lower bracket.

 

Simple, No-Lift Loading

The Steadyrack’s front-wheel bracket consists of 2 interlocking pieces of corrosion-resistant, 3/8″ thick zinc-coated steel. To load your bike, simply fold the brackets down, hike the bike up on its rear wheel, and roll it forward so the front wheel rests in between the brackets. The steel brackets support your bike’s front wheel from the bottom and on both sides to prevent movement. If you’ve positioned the rack to hold your bike up off the ground, the rack will do the work of lifting your rear wheel when you roll the front wheel onto the brackets.

The Steadyrack’s rear-wheel bracket helps keep your bike straight on the rack while still allowing it to swivel as needed for storage. The rear-wheel bracket is a separate piece, so it can be installed at any distance from the front-wheel bracket to accommodate your bike’s wheelbase.

 

Easy Installation

The Steadyrack installs easily with included mounting hardware. Simply choose the spot on your wall that you want the bike to hang and mount the front-wheel holder. Load your bike onto the front-wheel holder, mark the spot where the rear wheel contacts the wall, and install the rear-wheel bracket.

B-SRFR-001 Steady Rack Fender Bike Storage Rack – Folding – 1 Bicycle