Booster Plug Fuel Injection Tuning

The BoosterPlug fuel injection tuning is accepted worldwide, as a brilliant and affordable way to transform your motorcycle from ”OK” to ”Absolutely Marvelous”.

Compared to the Power Commander, the BoosterPlug offers similar or better tuning results for must owners – at a much lower price and without the complicated setup.

No complicated mechanical work or programming is required when installing the BoosterPlug. You simply plug it in using the original connectors and you are done.

A plug and play solution to improve your motorcycle in so many ways:

– Eliminate the poor on/off like throttle action
– Stronger acceleration
– Fix the annoying low-speed surging problem
– Stronger and more reliable Idle
– Far less popping in the exhaust on deceleration

 

How does it it work then ?

  – If you can trick the Fuel Injection ECU to think the ambient air temperature is lower than the actual readings,
    the ECU will richen up the injected mixture by a certain amount.
  – The correct enrichment will greatly improve the driveability of your bike
  – Basically, it is done by adding some extra resistance to the Air Intake Temperature Sensor, and the method
    have been tested thoroughly by many independent sources and it actually works. No magic involved 🙂 

 The intelligent solution !

  – The BoosterPlug is the only Plug and Play device that offers a stabilized enrichment of the mixture in different ambient temperatures. 
  – To do this, the BoosterPlug is using an extra temperature sensor (and a few other components), that will work in cooperation with the
    original Air Intake Temperature Sensor.